Heat exchanger is used in hot water heater tank in order to supply high demand of hot water.

Hot water heater tanks can be produced with two different processes

• Enameled
• Hot-dip galvanized

Heat sources used by Hot Water Heater Tanks are listed below;

1. Solar power system
2. Heat pump
3. Solid fuel boiler

Areas of Usage of Hot Water Heater Tanks
Benefiting from solar power and storing hot water reduce the energy costs for the customers where considerable amount of hot water needed such as hotels, apartments, factories, villas, hospitals and industrial plants.

For further information please visit www.kodsan.com.tr

In order to successfully covering enamel, the oil on the surface of galvanize must be sterilized with acid and passivation must be implemented. This surface preparation will be provided by 6 or 7 tanks and all chemical substances must be checked in every hour. Moreover, the temperatures of the tanks and the duration of the products in thanks should carefully examine.
Enameling process is start after selecting appropriate galvanize, and producing tanks with accurate processes.-nbsp; After covering enamel, it will be fired in desiccators cabinet with 860-deg;C. The firing duration should be same for all surfaces; otherwise the enamel will be burned. Isolation is another important step for enameling process, in small products polyurethane is used and in large products sponge isolation or classic isolation can be used.

There can be pinholes in both enameled heater tanks and all boiler types such as quick boilers, super boilers and water heaters. Magnesium Anode, Aluminum Anode and Titanium Alloy Anode are used to prevent pinhole corrosion.

For more information about capacity and detailed technical information of Hot Water Heater Tanks, please visit www.kodsan.com.tr